MOBILE DIAGNOSTIC EXCELLENCE

The New Era of Mobile On-Site Imaging

HIGH-DEFINITION RADIOLOGY

3D ADVANCED IMAGING CONFIGURATION

Our mobile dental van is anchored by cutting-edge NewTom 3D CBCT scanning technology. Engineered to capture ultra-high-resolution 3D volume reconstructions of maxillofacial structures in seconds, it provides unmatched diagnostic accuracy directly where you need it most. Take powerful imaging directly to the patient, wherever and whenever it is needed. Other use cases can include Both TMJ joints in one scan, Full maxillofacial coverage, ENT/sinus work, Airway analysis, Full-arch implants

HOSPITAL-GRADE STANDARDS

Fully Equipped Mobile CBCT

Step inside a sterile, secure diagnostic environment. Our custom dental imaging vehicles are built from the ground up with professional lead shielding, high-capacity climate-control, and a premium Hydraulic Heavy-duty commercial (4) point stabilizing system to keep sensitive hardware performing to clinical standards.

DENTAL EQUIPMENT INCLUDED:

: NewTom Giano HR 3D/Pan/Ceph Advanced 13X16. Machine installed. # W7GNHR3DS1

3D ADVANCED CONFIGURATION

• General dentistry

• Implantology

• Endodontics

• Gnathology

• General orthodontics

• Otorhinolaryngology

FOV 13 x 16 cm

FOR SALE

Own the Future of Mobile Dental Imaging

Fully equipped for immediate mobile deployment—bringing advanced 3D imaging wherever and whenever you need it.

MOBILE Cone Beam Computed Tomography CBCT X-RAY VAN

The Ultimate Agile Mobile Imaging CBCT Clinic

Precision Imaging

Leverage advanced NewTom 3D CBCT diagnostic capabilities directly inside the mobile unit. This scanner offers diagnostic precision in high-resolution 3D, allowing for exceptional treatment planning in implantology, surgery, and orthodontics on the move to maximize ROI and patient flow at multiple locations.

Turnkey Mobile Imaging Clinic

Expand your dental practice and bring high-quality diagnostic imaging directly to your patients with Mobile Conversions INC’s CBCT Mobile solutions. Specializing in turn-key, expertly engineered mobile dental vans. Bridges the gap between state-of-the-art dental technology and community outreach. Whether you are looking to serve multiple regional clinics, reach underserved areas, or scale your business without the overhead of permanent real estate, this vehicle offer an ideal solution. We will deliver domestically within the USA, with global shipping capabilities.

TECHNICAL SPECIFICATIONS

Explore the elite imaging capabilities, structural safety features, and readiness profile of the Mobile Cefla CBCT Van.

Imaging Specifications

Van Features

Ready for Sale

Gallery: A Closer Look

Explore the advanced clinical environment and layout of the Mobile CBCT. Engineered for rapid deployment, safety, and unmatched diagnostic precision.

Rear Interior

Diagnostic Imaging

Control Console

Ready to Take Your Practice Mobile?

New FOR SALE or Lease – turnkey CBCT imaging solution.

Promotional Price: $175,000 (Save $50,000 off retail!)

or (Contact for availability /Month Lease)

TECHNICAL SPECIFICATIONS

DENTAL EQUIPMENT INCLUDED:

: NewTom Giano HR 3D/Pan/Ceph Advanced 13X16. Machine installed. # W7GNHR3DS1

3D ADVANCED CONFIGURATION

• General dentistry

• Implantology

• Endodontics

• Gnathology

• General orthodontics

• Otorhinolaryngology

FOV 13 x 16 cm

Single volume maxillofacial image obtained automatically: a complete view of the maxillary sinuses and of the entire dental arches. Also ideal for upper airway examinations.

GiANO HR provides a wide range of 2D and 3D examinations that are ideal for diagnoses concerning either complete or partial dentition, single dental arches and all maxillofacial regions. 3D volumes with FOV from 4 x 4 cm and 16 x 18 cm and resolution up to 68 μm – which is among the highest resolution available on the market – allow users to assess maxillary sinuses, frontal sinuses, temporomandibular joints, airways and the internal ear.

• Advanced Kinematics for quality images

• Intelligent Autoadaptive pictures treatment

• MultiPan mode, allows to choose the best panoramic view among a set of five images in a single scan

• Safebeam™ technology automatically sets the correct and lowest-necessary dose for the patient

• Wide range of 3D protocols with FOV from 4×4 up to 16×18

• Complete and user-friendly soft-touch console

• Ceph mode and three different 3D configurations: PRIME (10×8), ADVANCED (13×16) and PRODFESSIONAL (16×18) Integrated NNT software platform

ensors technology

CMOS cls

Patient alignment

4 laser guides

Patient positioning

7 head contact points

ECO mode

• Scan time 2D: 6 sec

• Scan time 3D: 6.4 sec

Supported protocols

DICOM nodes: IHE compliant (Print, Storage Commitment, WorkList, MPPS, Query Retrieve), DICOM 3.0, Twain, Vdds

Minimum available work space requirement

• 2D and 3D PAN: 54.7 x 44.8 inches

• 2D and 3D CEPH: 54.7 x 70.9 inches

User-friendly for patients on wheelchair

( NewTom Giano HR, FOV 13 x 16 cm

https://www.newtom.it/…/NT_GiANO%20HR%20DC%20TVC_12… )

( “NewTom Giano HR” Videos

https://cefladental.vids.io/videos?q=NewTom+Giano+HR )

—

BODY CONSTRUCTION:

The wall construction shall consist of the following:

2” of Tuff-R Cellotex installed in doors, walls and ceiling. Additional side wall insulation included.

DOOR:

The door insulated and covered with panel to match interior décor.

FLOORING:

The sealed easy clean waterproof woodgrain floor will allow no external moisture buildup inside coach.

INSULATION:

2” thick closed cell foam insulation with an R-factor of up to 14 for ceiling, sidewalls and doors to maintain the most comfortable working environment for staff and patient.

INTERIOR SPECIFICATIONS:

STEP SYSTEM:

Integrated step system located outside the sliding door to gain entrance to the diagnostic suite. A hand rail is added for increased safety when entering and exiting.

CABINETRY:

Custom interior will include latches to prevent opening while in transit. Countertop Corian or equivalent.

LIGHTING:

(2) flush mounted LED string lights, front to rear with dimmer switch.

ELECTRICAL SYSTEM:

AC Electrical System: 120VAC single phase system rated for anticipated load. 50A/120vac rated distribution panel configured with UL listed circuit breakers. 12 gauge, 3-conductor (12/3), 600V rated, UL approved, MC commercial cable. labeled circuit number and/or designation at all termination points. adheres to applicable NEC and FMVSS regulations. Wiring run in external areas encased in liquid tight conduit to further protect against the elements and mechanical damage.

DC Electrical System: 12VDC, negative ground system rated for anticipated conversion load. fuse panel using blade type fuses. All circuits protected from over current by fuses rated for a minimum of 125% of anticipated load. 12VDC functions clearly designated by printed labels.

Generator battery system includes Separate generator battery + charging system via Shorepower hook-up during operation periods when the vehicle engine is not running to prevent depletion of generator battery power.

Wiring Requirements:

All high-current battery cabling shall utilize full-length runs sized to load. Terminal ends shall be crimped with manufacturer recommended tooling and sealed using color-coded wrap.

GENERATOR:

6.5 KW Cummins gasoline quiet Onan Generator 7.0 EVAP. (60db(a)) at 50ft.

GENERATOR COMPARTMENT:

A wood frame sound-insulated sealed compartment with proper support & securely tied to floor and body framework. Isolated to elimination of heat, noise, and fumes to the coach area through walls and/or flooring without interfering with necessary airflow. Insulation of laminated sound deadening materials surround all possible areas of the generator compartment.

GENERATOR CONTROLS:

Generator start, stop switch and hour meter located in the interior cabinetry for easy accessibility.

HVAC:

One (1) 13,500 BTU roof mounted central heating and air conditioning system with overhead delivery is provided. A 5200 btu floor heater is also included.

STABILIZING SYSTEM:

Hydraulic Heavy-duty commercial (4) point stabilizing system with individual controls are provided and located at the passenger side rear door for easy, fast leveling and service.

CAB AREA:

Standard + Hydraulic control panel

DIAGNOSTIC AREA:

The technologist area Corian Work surface for computer located on a 12” base cabinet

Leaded / lead lined Divider wall curtain with leaded patient viewing glass

18” Accessories base cabinet with Corian work surface located on curbside wall.

Divider insulated wall, full width located directly behind CBCT system

SAFETY/SECURITY:

Fire Extinguisher

Smoke Detector

CO2 Detector

SHORELINE CORD:

Heavy-duty rubber covered 50’ long SO 10-2 with ground shoreline cord provided. Generator/shore power transfer switch is also provided.

$165,000 – $60k off retail!

—

CALL

Located in Cincinnati, Ohio

Built by Mobile Conversions Inc

Mike Dobbins

Phone: 513-797-1991

Email: Sales@mobileconversions.com

mobile-cefla-cbct-van-1-1-full

mobile-cefla-cbct-van-1-2-full

mobile-cefla-cbct-van-1-6-full

mobile-cefla-cbct-van-1-full

Mobile CBCT

mobile-cefla-cbct-van-3

mobile-cefla-cbct-van-8-full

mobile-cefla-cbct-van-9-full

mobile-cefla-cbct-van-12-full

Video Thumbnail: NEWTOM GIANO HR 3D EXAMINATION

fov-vision-cna-nwtom

NewTom Giano HR 3D Pan Ceph Advanced 13X16.

newtom-giano

NewTom-Giano-HR_headsupport

newtom-giano-hr-nnt